• +1 603-735-4560
  • contact@adp-barcelona.com
  • 883 Milford Street Andover, NH 03216
  • 4 Important Questions on Working a Heat Press

    4 Important Questions on Working a Heat Press

    If per chance you are wondering how to work a heat press, one of the things you can have in mind is that it is actually not difficult. As a beginner, it is very much difficult at first but over a period, mastery sets in. Nonetheless, it is something that can be mastered in a very short time. As featured on heatpressreview.com, below are some frequently asked questions by individuals who are bothered on how to work a heat press machine.

    1. How much power is needed?

    Owing to the variety of heat presses in the market, there is going be variation from machine to machine. You will find that most heat press will have between 8.5 to 14.5 Amps, thus using a standard 120 volts power outlet. You can also find 15-20 Amps options out there that will require you using a 220 volts outlet but they are less common.

    1. Is it heating correctly?

    One of the reoccurring question when it comes to working a heat press is whether the heat press is heating properly. In order to have this determined, you can lock the press down on temperature strips. It is important that you ensure that the temperature you get matches the temperature on the heater. It is important that your heat press is heating evenly and accurately.

    1. What temperature do I put it on?

    In addition, other than knowing if the heat press is heating properly or not, it is also important to have knowledge of the temperature to put the heat press on. This is actually one of the easiest things that you will be faced with when figuring how to work a heat press. The press will have a dial that is incorporated in the design for adjusting the temperature according to whatever the graphics or the box says that you placing on the t-shirt.

    1. What should I know about the pressure?

    One of the last things you want to learn about your heat press is the pressure. It is important for you to make sure that the pressure is at the right level, just so it delivers sufficient amount of pressure to have the graphics transferred.